home,page,page-id-3464,page-template,page-template-full_width-php,ajax_fade,page_not_loaded,,,wpb-js-composer js-comp-ver-3.6.12,vc_responsive

COMMANDER – Intelligent spraying - Trailer to suit any application

 

One of the most awarded sprayers with tank sizes 6500, 8500 & 10000 litres and boom widths from 24m to 48.5m still leads the way in capacity and performance. ActivAir ActivAir is a rapid nozzle on/off control system, that instantaneously open and close the non-drip nozzles during spraying.

 

Air pressure is reticulated along the boom through 8mm tubing to electrically activate solenoid valves and then through 4mm tubing to each non-drip valve. Using DynamicFluid4 precision application rate control, COMMANDER delivers instant spray pressure on every headland and unrivalled rate control - holding the target rate without lag, whether sections are being switched on or off, or changing speed. 

 

Fast, safe chemical mixing and transfer is provided with TurboFiller and direct chemical suction. A unique 27-point high capacity venturi agitation ensures effective uniform tank mixing. A choice of spray controllers offer the highest level of performance and application precision.The fluid system, from tank to nozzle, has been developed to retain the lowest possible residual valume, making it easier to rinse between fills.

COMMANDER Features


WorkZone

 

The HARDI ChemFiller is standard on the COMMANDER and has been developed to handle large quantities of powders and liquids. The high capacity of the ChemFiller is achieved by using a combination of high vacuum and high pressure vortex nozzles placed inside the hopper.  High capacity Vortex action inside hopper.  Liquid at high pressure is used to create a powerful vortex inside the hopper. This vortex will efficiently mix all powder and liquid chemicals before they are transferred into the sprayer.  

 

Very high vacuum and suction capacity. A large external ejector system creates a powerful vacuum that transfers powders and liquid directly into the tank. The sturdy lid can be used as work table. When the lid is opened, it can be used as a bench for measuring or storing the chemicals before mixing. 

Hydraulic Suspension 

 

Proven reliability and performance, the COMMANDER suspension system is compact and provides enhanced boom stability. The compact hydraulic axle suspension elements carry the load better than conventional systems. The suspension is ideally suited to different load ratings, providing the sprayer with a low centre of gravity and enhanced boom stability.

 

ActivAir

 

The ActivAir is a rapid nozzle on/off control system, which uses the Commander’s on-board air supply to instantaneously open and close non-drip nozzles during spraying.  Air pressure is reticulated along the boom through 8mm tubing to electrically activate solenoid valves and then through 4mm tubing to each non-drip valve. The spray lines are divided into 14 sections to ensure minimal overspray when AutoSection control is in operation.

DynamicFluid4

 

The DynamicFluid4 system will instantaneously calculate and adjust regulation for increases in RPM. The DynamicFluid4 uses 4 sensors in the fluid system - measuring RPM, position of regulation valves, flow and pressure. The sensors of DynamicFluid4 each have their individual roles in the fluid system, but they can also provide redundancy for each other. Combined with brand new control software and a new, unique ceramic regulation valve, DynamicFluid4 is provides the best precision and performance available on the market today. 

HARDI Features


Media


COMMANDER Technical specifications



Tank6500850010000
Pumps, type - l/min 464, 540rpm, 6-diaphragm, 334 l/min 464, 540rpm, 6-diaphragm, 334 l/min 464, 540rpm, 6-diaphragm, 334 l/min
Boom FORCE 30, 32, 33, 36m 30, 32, 33, 36m 30, 32, 33, 36m
Boom B3 Aluminium 32.5, 36.5, 38.5, 40.5, 42.5m 32.5, 36.5, 38.5, 40.5, 42.5, 48.5m 32.5, 36.5, 38.5, 40.5, 42.5, 48.5m
Boom TERRAFORCE 36, 38, 40, 42m 36, 38, 40, 42m 36, 38, 40, 42m
Control Type HC6500 HC6500 HC6500
Suspension Hydraulic with nitrogen accumulator Hydraulic with nitrogen accumulator Hydraulic with nitrogen accumulator
Track adjustment 2.2 to 3m 2.2 to 3m 2.2 to 3m
Weight drawbar (tank empty), kg 1565 1134 1145
Weight axle (tank empty), kg 5534 6226 6255
Weight total (tank empty), kg 6899 7360 7400
Total length, (m) TERRAFORCE 8.35 8.85 8.85
Total height, (m) TERRAFORCE 3.65 3.65 3.65
Width, (m) TERRAFORCE 3.5 3.5 3.5
Track width, (m) 2.2 to 3.0 2.2 to 3.0 2.3 to 3.0
Length of draw bar to axle, m 5.5 6.05 6.05
Under axle clearance .795 .795 .795
Rinse tank 730 730 730
Hand wash tank 17L 17L 17L
ChemLocker 100kg load rated 100kg load rated 100kg load rated
Tyre Standard 520/85 R42 520/85 R42 710/70 R42

Brochure


Contact us